The zone, From and To fields start with an any of / any but choice
instead of a checkbox under the list, and an "any but" list is tinted
red. The release script encodes a + (build metadata) in its URLs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The ruleset's diff names the chain each hunk is in on its @@ line, as
git names the function. A history entry shows what it did to the
ruleset (web page, hc history diff, GET /history/{id}/diff), rebuilt
from the current configuration by stepping back through the later
entries. A changed setting is listed by its own fields
(builtins.drop_invalid) instead of the whole object.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reverse lookups (internal/names, POST /names) put a name beside each
inside address in connections, the log, quota usage, the dashboard's
quotas and the statistics' devices and blocked sources, in the web UI
and hc (--no-names to leave them out). Only inside addresses are looked
up: an inside zone's networks, and private ones outside the external
zones'. Names are cached (names.cache, 10m) and never stored;
names.resolver picks the DNS server.
Also: hc stats top devices listed each device twice; the dashboard's
quotas named the rule's ID twice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A rule named in the matrix, the log, the tracer, statistics or the
dashboard opens the Rules page on its chain, scrolled to it and
highlighted (#/rules?rule=ID; the chain is looked up when the link has
none). The Rules page shows each rule's ID beside its order.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A cell reads allow, block or partly (some new connections let through,
the rest not), with its exceptions counted by what they do (+3 -1), and
what they let through: services with the addresses they are limited to,
under the grid in hc matrix and in each cell on the Matrix page. A zone
to itself is marked: only traffic routed between its interfaces passes
the firewall. The details list each rule's hits. hc matrix pads the
grid by visible width: the colours' escape codes had thrown it out of
line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
shadow.enabled in housecarl.yaml loads Housecarl's ruleset so that it
blocks, rejects and translates nothing: drops and rejects count and
accept (an accept only ends Housecarl's chain), policies accept and log
what they would drop, NAT only counts, MSS clamping and the flowtable
are left out, and raw rules that do more than accept, drop or reject are
left out with a warning. Comments mark what would happen ([would drop]).
Filter chains run after the other firewall's (+10) or before (-10); NAT
chains always first. Every change is checked by nftables in both forms.
No probation; takeovers and closing connections are refused. The boot
fallback filters nothing. internal/tablewatch puts the table back after
a flush ruleset. Mode in status, healthz, whoami, the web UI, the log
and the tracer; hc ruleset --enforcing. docs/shadow.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
internal/stats samples every minute what the kernel already counts: the
interfaces' counters (per zone too), Housecarl's table (hits per rule,
built-in and policy; drops by chain; quotas; per-device sets), the
connection tracking table, and housecarld's and the host's memory, CPU
and load. Logged drops feed top lists of sources and what they tried.
Aggregates go to a database of their own (stats.db; per minute 7 days,
per hour 90 days, per day 2 years), with the store and queries from
Jarl's.
Traffic per inside device is a setting (stats_per_device): counting sets
stats_up/down_v4/v6 and rules at the top of the forward chain, IPv6 per
/64, carried across reloads. Set names starting with meter_, conn_,
quota_ or stats_ are reserved (set_name_reserved).
GET /stats/{status,summary,timeline,top,hits,heatmap}, hc stats, a
Statistics page with Jarl's charts, two charts on the dashboard, and a
conntrack_full warning. e2e: 188 checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
internal/matrix walks each pair's rules in order, as nftables would, for
new connections: zone → zone (forward), zone → the firewall (input) and
back (output), with the built-ins that act on new connections. A rule
for the whole pair decides it; one for part of its traffic (addresses,
services, times, rates, a quota) is an exception; the rest falls to the
policy. Rules whose addresses all lie in networks connected to other
zones are left out of a pair. GET /matrix (with ?changeset, pending
changes), hc matrix [FROM TO], and a Matrix page whose cells open their
rules.
e2e: 166 checks, among them the matrix of the maintainer's imported
ruleset.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Connections: the kernel's tracked connections, read and closed over
ctnetlink (internal/conntrack, raw netlink like the drop log), with
their NAT and TCP state; closing one makes the rules check its next
packet again (GET /connections, POST /connections/close; hc
connections; Traffic → Connections).
- Rules can check every packet (every_packet, --every-packet): before
established connections are accepted, so a drop or reject also stops
connections already open. They can't accept.
- A packet tracer (internal/trace): a table of its own, inet
housecarl-trace, marks the packets a filter picks, `nft monitor trace`
reports every rule and policy they meet in every table, and the tracer
names what accepted or dropped them, Housecarl's rules by name (POST,
GET, DELETE /trace; hc trace; Traffic → Trace). One trace at a time,
at most 200 packets and 20 a second; the table goes when it ends.
e2e: 157 checks, among them an upload a normal block doesn't stop and an
every-packet one does, and a trace naming the blocking rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The new rule window shows chain, zones, addresses, services, family,
action, log and comment; connection state, time window, rate limit,
quota, connection limit and raw nftables open with "+" buttons (and
close with ✕, which unsets them). Editing a rule opens what it uses.
Group addresses appears only when a per-address limit, quota or
connection limit is set. Clearer help for connection state and status.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Changesets, as in Jarl: configuration changes are operations that can be
staged in a changeset, checked as they are added (validation and nft -c),
reviewed with the diff of the ruleset, and applied together as one
history entry, then on probation like any change made over the network.
The web UI collects edits for review by default (pending rows, a bar with
Review and Apply now, a Changes page, a switch for live edits); hc stages
with -C ID or HOUSECARL_CHANGESET (checked like JARL_CHANGESET) and has
hc changeset create/list/show/diff/apply/discard/remove. Undo, import and
takeover refuse a changeset. --dry-run shows the ruleset's diff.
Bandwidth and quotas: rate limits in bytes, per source or destination;
quotas per rule or per address that reset daily, weekly, monthly on a
day, or by hand, with their usage carried across reloads, saved for
reboots, shown by hc quotas and on the rules page, and reset with hc rule
reset-quota. Rules that count traffic are checked before established
connections are accepted (so they see every packet) and can't accept.
Per-address limits group IPv6 by /64 by default (--group-v4/-v6).
Per-source rate meters use update. The importer turns meters, byte rates
and quotas into these fields.
The examples in the web UI, hc's help and the docs use documentation
addresses and generic names instead of the maintainer's network.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Zones, address sets (IPv4 and IPv6 mixed, dynamic sets with timeouts) and
services, ordered rules in the early, input, forward and output chains,
port forwards with hairpin NAT and IPv6 pinholes, source NAT, redirects,
and switchable built-ins (loopback, conntrack, ICMPv6, antispoofing, MSS
clamping, DHCPv6 client, flowtable). Every change is validated, checked
with nft -c and applied in one transaction to Housecarl's own table,
inet housecarl; changes made over the network roll back unless
confirmed, and the confirmed ruleset is loaded at boot by
housecarl-ruleset.service. An empty configuration applies nothing.
Also: hit counters and the drop log (nflog), 'hc import' of an existing
nftables ruleset and 'hc takeover', the hc CLI, the REST API and the web
UI, users, scoped tokens (sets:write:NAME), the audit log, the web UI's
certificate through Jarl, Debian packages, docs, unit tests with real
nft 1.1.3, and an e2e test with real traffic (71 checks).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Housecarl will be a firewall manager for nftables, built the way Jarl and
Steward are: housecarld (a daemon with a REST API and web UI), hc (the
CLI) and SQLite.
- The logo: a carved Nordic doorway in Jarl's blue (artwork/logo.svg),
with a small version without the carvings, lighter on dark
backgrounds. scripts/logo.py builds the web UI's copies and
scripts/banner.py the README banner.
- The HOUSECARL wordmark in Jarl's and Steward's angular letters, with
new H, O, U and C (assets/brand.js), and the UI's color tokens.
- housecarld and hc print their version; the Makefile, version package,
AGENTS.md, CHANGELOG and the design sketch (docs/design.md).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
abrown38andClaude Opus 5.5