Jarl works out which views are reachable from the internet (match-clients
ending in a catch-all, not private-looking addresses: an internal view of a
global IPv6 prefix is still yours; a server without views: open allow-query
and a non-private listen address), with a per-view override (schema 9), and
checks public ones: rate limiting, open resolver, minimal-any, cache
snooping, open NOTIFY and transfers, version and host name, management
interfaces. Fixes are staged like any change, including rate limiting from
ISC's example in log-only mode with the secondaries exempt, then enforcing.
named logs what rate limiting limits (or would, in log-only mode, where its
counters don't move) as query-errors; Jarl routes those lines to its log
and counts them (rrl breakdown, ratelimited top lists, Prometheus
jarl_ratelimit_logged_total), shown on the new Exposure page.
A change that newly opens a public view up must be confirmed (accept_risk,
--accept-risk, a checkbox on the Changes page; 409 confirm_risk
otherwise). Findings can be acknowledged with a reason and stay visible as
info. GET /exposure, POST /exposure/fix|ack|unack, jarl exposure,
docs/exposure.md.
Also fixes query statistics skipping TSIG-signed queries ("IP#port/key
NAME" in named's log).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ACLs, views' match lists, options with address match lists and blocking
client groups take ranges such as 10.0.10.101-10.0.10.199 or
2001:db8::100-2001:db8::1ff (negated, or with spaces around the dash, too).
Jarl stores the range as written and writes the fewest prefixes that cover
exactly that range to named.conf, with the range as a comment. New package
internal/iprange; namedconf gets an AMRange element (a range used to parse
as an ACL name), ExpandRanges and statement comments. Mistakes are refused
when entered, validation sees what ranges cover, and IPv6 ranges in the
IPv4-mapped space get a warning. The web UI shows what a range becomes
while typing (GET /catalog/ranges).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each view's match-clients starts with "key jarl-view-NAME" (after
"!key" for the views listed after it), so a query signed with a view's
key lands in that view from any address. The secrets are derived from a
random seed in Jarl's database. The delegation check signs its queries
to this server's own addresses with the key of the zone's view: before,
they got whichever view matched the server's address, usually internal.
jarl view key / GET /views/{id}/key show a key for dig -k (tsig:write,
audited). jarl-view- key names are reserved; the importer drops view
keys from a configuration Jarl wrote.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A disabled zone stays in Jarl with its records, options and history,
still editable, but named doesn't load it; enabling it serves it as it is
then. Signed zones, and zones another view shares, can't be disabled.
jarl zone disable|enable, the zone page's Disable/Enable button.
Database schema 7.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
jarld downloads blocklists (Adblock, hosts or plain domains), checks them
daily and reloads named only when a list changed; your own block and
allow rules take precedence, and the most specific rule wins. Lists and
rules apply per view (default: every view that offers recursion). Web UI
Blocking page with name checks, jarl blocklist and jarl block, the
/blocking API, blocked counts in the statistics. Database schema 6.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A disabled record stays in Jarl with its ID, TTL and comment but is
left out of the zone; the zone file lists it as a comment. Web UI
toggle, jarl record disable|enable, record.disable|enable operations
and API endpoints. Database schema 5.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Zones get a DNSSEC setting: named signs them with BIND's default (or a
custom) dnssec-policy and inline signing, with keys in a per-view key
directory. Jarl shows the keys, the DS record and when it is safe to
publish it, checks the parent's DS records (check-ds, which also tells
named), and refuses steps that would break a signed domain: switching
straight to unsigned, finishing a turn-off too early, deleting or moving
a signed zone, TTLs above max-zone-ttl. Turning off goes through the
insecure policy; wipe starts over once the parent has no DS.
Backups store the DNSSEC keys and restore puts them back for named; the
backup unit gets CAP_DAC_READ_SEARCH to read them. Jarl raises a zone's
serial above named's whenever it writes an older one (after a restore).
The serials check compares the signed serial.
With a Porkbun API key in jarl.yaml, the registrar's name servers, glue
records and DS records can be shown and changed, each change checked
first (dry run, force to override).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Off by default (stats in jarl.yaml). When enabled, Jarl adds a loopback
statistics channel and a response log to named's configuration (merged
into existing logging/statistics-channels statements) and switches
response logging with rndc responselog, because the responselog option
only counts when named starts. jarld polls named's counters every minute
and tails the response log (resuming after restarts and across
rotation). It stores aggregates, never individual queries, in a separate
SQLite database: per-minute, hourly and daily counters (queries, result
codes, record types, views, zones, cache hits, upstream latency, DNSSEC)
and hourly/daily top lists (names, clients, NXDOMAIN and SERVFAIL names,
refused clients), each with its own retention. Clients can be anonymized
or excluded.
- Web UI: Statistics page with KPI tiles, queries and failed answers over
time, a weekday x hour heatmap, top lists and breakdowns; SVG charts
with hover/keyboard readouts, a table view and light/dark palettes
validated for colour-vision deficiency.
- CLI: jarl stats status|summary|top|timeline|heatmap|breakdown.
- API: /api/v1/stats/*, behind a new "stats" permission resource.
- jarld brings named's configuration up to date with jarl.yaml at
startup (engine.SyncConfig), never overwriting hand-edited files.
- resync now refuses to overwrite drifted files without force, as
documented.
- tmpfiles.d creates /var/log/named (allowed by named's AppArmor profile
on Debian 13 and Ubuntu).
- The e2e harness runs named with -f like the Debian unit.
- docs/stats.md, plus API, CLI, configuration, permissions and README
updates.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Jarl keeps a BIND 9.20 server's whole configuration (views, ACLs, TSIG
keys, zones of every type, records, named.conf options) in SQLite and
renders named.conf, keys.conf and zone files from it.
Every change goes through one changeset pipeline: whole-configuration
validation, named-checkconf -z and named-checkzone in a staging
directory, atomic install, rndc reconfig/reload, serial verification
with rndc zonestatus, and rollback if named does not load the change.
Changes apply one at a time by default or are bundled and applied
together. Applied changesets can be reverted.
- jarld: the daemon with the REST API and an embedded web UI, plus import,
adopt, check, resync, backup and local user recovery commands
- jarl: the CLI, including ACME DNS-01 hooks for certbot and acme.sh
- users with argon2id passwords and CSRF-protected sessions; hashed API
tokens with granular grants and roles; an audit log
- systemd unit, sysusers.d/tmpfiles.d files, Makefile
- unit tests, integration tests against a real named, scripts/e2e.sh
- docs/ guides, README and CHANGELOG
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
adamandClaude Opus 5.5
abrown38andClaude Opus 5.5