Ticking update PTR alone did nothing: the web UI didn't send it, and the engine only acted when the name or address changed. Alone it now adds a missing PTR record (or enables it); for linked zones every linked view's reverse zone counts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Zones of the same name in different views can be linked. Shared records
are kept in step: a change in one view reaches the others in the same
changeset, as explicit operations, so the diff, permission checks,
history and undo cover every view. Records local to a view override the
shared records of that name and type there; removing the override brings
the shared ones back, and sharing a view's version makes it every view's.
Each zone keeps its own options, serial and file.
Linking existing zones changes no answer: what is the same everywhere
becomes shared, the rest stays local. Unlinking keeps every record, all
local. ACME challenges are written once per link, and --view all changes
a link once. jarl zone link/unlink, zone create --link-with, record
--local/--shared, LINK column, web UI controls, POST /zones/{zone}/link
and /unlink, validation checks linked_*, store migration 11, docs and
e2e.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Jarl is now an ACME client (lego's core, no DNS providers). It answers
DNS-01 challenges in a zone it serves, or through Porkbun's DNS API while
Porkbun serves the domain; "auto" decides from the domain's public name
servers at every renewal, and a CNAME on _acme-challenge is followed.
Certificates are used for jarld's HTTPS (served without a restart; each
port speaks HTTPS and plain HTTP, plain HTTP from loopback and trusted
proxies still served) and/or written for named's DNS over TLS/HTTPS, with
rndc reconfig on renewal. Renewal follows the CA's ARI window or two
thirds of the lifetime, with back-off. Certificates you renew yourself
can be used too. Certificates page and dashboard card, jarl cert,
/api/v1/certificates, Prometheus gauges, docs/certificates.md, and an
e2e section against Pebble.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Jarl works out which views are reachable from the internet (match-clients
ending in a catch-all, not private-looking addresses: an internal view of a
global IPv6 prefix is still yours; a server without views: open allow-query
and a non-private listen address), with a per-view override (schema 9), and
checks public ones: rate limiting, open resolver, minimal-any, cache
snooping, open NOTIFY and transfers, version and host name, management
interfaces. Fixes are staged like any change, including rate limiting from
ISC's example in log-only mode with the secondaries exempt, then enforcing.
named logs what rate limiting limits (or would, in log-only mode, where its
counters don't move) as query-errors; Jarl routes those lines to its log
and counts them (rrl breakdown, ratelimited top lists, Prometheus
jarl_ratelimit_logged_total), shown on the new Exposure page.
A change that newly opens a public view up must be confirmed (accept_risk,
--accept-risk, a checkbox on the Changes page; 409 confirm_risk
otherwise). Findings can be acknowledged with a reason and stay visible as
info. GET /exposure, POST /exposure/fix|ack|unack, jarl exposure,
docs/exposure.md.
Also fixes query statistics skipping TSIG-signed queries ("IP#port/key
NAME" in named's log).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ACLs, views' match lists, options with address match lists and blocking
client groups take ranges such as 10.0.10.101-10.0.10.199 or
2001:db8::100-2001:db8::1ff (negated, or with spaces around the dash, too).
Jarl stores the range as written and writes the fewest prefixes that cover
exactly that range to named.conf, with the range as a comment. New package
internal/iprange; namedconf gets an AMRange element (a range used to parse
as an ACL name), ExpandRanges and statement comments. Mistakes are refused
when entered, validation sees what ranges cover, and IPv6 ranges in the
IPv4-mapped space get a warning. The web UI shows what a range becomes
while typing (GET /catalog/ranges).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A web changeset with a staged record delete could not be applied after
the record was deleted elsewhere (e.g. with the CLI), and the error only
said "record N does not exist", so it was hard to find the operation to
remove. A delete of a record that is already gone is now a no-op with a
warning. Other operations that no longer apply fail with their number and
summary (op_summary in the API), and the Changes page marks that row and
offers to remove it from the error.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Client groups put devices (addresses, networks, or ACLs of them) at a
blocking step: off (only your rules), normal (the default), or steps
added above it, each including the lists of the steps below. Lists
start at a step. In each view, a gate policy zone in front of a step's
lists lets the devices below that step through (rpz-client-ip triggers
with rpz-passthru), so every list is still loaded once. The IPv6 part
of a gate leaves the IPv4-mapped range out: named matches IPv4 clients
as ::ffff:a.b.c.d.
Web UI: a Devices panel on the Blocking page and a step on each list.
CLI: jarl block step, jarl block group, jarl blocklist --step. API:
/blocking/steps, /blocking/groups. Database schema 8.
Also: copying the state kept empty lists as empty (not nil), so
reverting a changeset no longer adds restore operations for unchanged
blocklists, rules and views.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each view's match-clients starts with "key jarl-view-NAME" (after
"!key" for the views listed after it), so a query signed with a view's
key lands in that view from any address. The secrets are derived from a
random seed in Jarl's database. The delegation check signs its queries
to this server's own addresses with the key of the zone's view: before,
they got whichever view matched the server's address, usually internal.
jarl view key / GET /views/{id}/key show a key for dig -k (tsig:write,
audited). jarl-view- key names are reserved; the importer drops view
keys from a configuration Jarl wrote.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Added:
- Server statistics: named's memory and CPU (from /proc), cache size,
sockets and client counts against their limits (statistics channel,
rndc status), host memory and load, and free disk space. Memory and
CPU are kept over time as gauges (sum and sample count, averaged in
timelines). Statistics page Server section, jarl stats server,
GET /stats/server.
- jarl record add|set|delete|disable|enable --view a,b | all: the same
change in each view, applied as one changeset.
- Blocking can be paused until resumed (jarl block pause indefinitely,
"Until I resume", {"indefinitely": true}).
Changed:
- List options (allow-transfer, forwarders, ...) get their braces added
when given without them.
- The dashboard lists named-checkconf's warnings about the running
configuration; the CLI prints them after an apply.
- Stats page: tile and card rows fill their width, and the queries and
failed answers charts share margins so their time axes line up.
- Dashboard: options have their own tile.
- 24-hour times in the web UI.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Options of a block (server options, a view, a zone) are listed and
written grouped by topic, alphabetical within a group, so the same
option is in the same place everywhere. Top-level statements keep the
order they were added in.
named.conf diffs add the enclosing blocks to each hunk header, like
git's function context: @@ -50,6 +49,8 @@ view "internal" {.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A disabled zone stays in Jarl with its records, options and history,
still editable, but named doesn't load it; enabling it serves it as it is
then. Signed zones, and zones another view shares, can't be disabled.
jarl zone disable|enable, the zone page's Disable/Enable button.
Database schema 7.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
jarl block pause|resume (and the Blocking page) lets every name through
for a while; jarld resumes on time. The lists stay loaded: the rules zone
just passes everything. Statistics gain the clients with the most blocked
queries and blocked queries on the queries chart. The view choice in the
blocking forms is a dropdown.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
jarld downloads blocklists (Adblock, hosts or plain domains), checks them
daily and reloads named only when a list changed; your own block and
allow rules take precedence, and the most specific rule wins. Lists and
rules apply per view (default: every view that offers recursion). Web UI
Blocking page with name checks, jarl blocklist and jarl block, the
/blocking API, blocked counts in the statistics. Database schema 6.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A disabled record stays in Jarl with its ID, TTL and comment but is
left out of the zone; the zone file lists it as a comment. Web UI
toggle, jarl record disable|enable, record.disable|enable operations
and API endpoints. Database schema 5.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The zone's Name servers tab no longer waits for the other servers before
showing: it lists each query as a dig command line with a waiting
counter, fills in the answers as they arrive, then shows the result with
the queries under "Queries sent". Results (serials and delegation) are
kept for 10 minutes so revisiting the tab is instant; "Check again" asks
anew, and a check keeps running when the tab is left.
GET /zones/{zone}/serials?stream=1 streams the queries as
newline-delimited JSON (nscheck.Checker.Watch); without it the endpoint
is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Zones get a DNSSEC setting: named signs them with BIND's default (or a
custom) dnssec-policy and inline signing, with keys in a per-view key
directory. Jarl shows the keys, the DS record and when it is safe to
publish it, checks the parent's DS records (check-ds, which also tells
named), and refuses steps that would break a signed domain: switching
straight to unsigned, finishing a turn-off too early, deleting or moving
a signed zone, TTLs above max-zone-ttl. Turning off goes through the
insecure policy; wipe starts over once the parent has no DS.
Backups store the DNSSEC keys and restore puts them back for named; the
backup unit gets CAP_DAC_READ_SEARCH to read them. Jarl raises a zone's
serial above named's whenever it writes an older one (after a restore).
The serials check compares the signed serial.
With a Porkbun API key in jarl.yaml, the registrar's name servers, glue
records and DS records can be shown and changed, each change checked
first (dry run, force to override).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Daily database backups: jarl-backup.timer runs 'jarld backup', which
writes jarl-<UTC time>.db into backup.dir, checks it before naming it,
and prunes by the time in the name while always keeping the newest
keep_at_least. New backup: section in jarl.yaml; the dashboard and
'jarl status' show the newest backup and warn when it is stale or
failed. The Debian package enables the timer.
- 'jarld restore [FILE | latest]': checks the backup, shows it next to
the current database, keeps the current one aside and records the
restore. 'jarld serve' holds a database lock, so a restore can't run
under a live jarld and two jarlds can't share a database.
- Token expiry warnings from 14 days ahead: dashboard, token lists, a
daily log line, and a CLI warning via the Jarl-Token-Expires header;
'jarl token list --expiring'.
- 'jarl zone serials' and the zone page's Name servers tab: compare the
serial on a primary zone's secondaries (NS records, also-notify) or a
secondary zone's primaries with this server's.
- 'jarl zone delegation': for zones on the internet, check the parent's
delegation and glue against the zone; an undelegated zone gets a note.
- Server: Jarl/<version> header; CLI exit code 2 for failed checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The dashboard counted every open changeset, including empty ones and
other users', so "Pending changes (1 open)" led to an empty Changes page.
It now counts the user's own changesets that contain changes, the status
API's open_changesets skips empty ones, and in review mode a draft created
for an edit the server rejects is discarded instead of left open.
docs/concepts.md: zone types, a new zone's name servers and glue, reverse
zones for any network, and dynamic updates versus API tokens and TSIG keys.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- CLI: name several servers and groups in the config file; select them
with -s/--server NAME|GROUP|all|URL or JARL_SERVER. A command aimed at
several servers is dry-run on all of them first and only runs if every
one accepts it. Named servers always use their own token.
- Reverse zones: /32 and /128 get single-address zones; networks between
octet or nibble boundaries (e.g. a /22) are covered by several zones
created together, from the CLI and the web UI.
- Fix: under jarl.service's RestrictSUIDSGID, creating a view directory
failed on chmod with the setgid bit; fall back to the permission bits.
- Web UI: the review/live switch is a small header button, and the
pending-changes bar only shows when there are pending changes.
- TSIG key wording; the keys page points to restricted API tokens.
- Docs: several servers (cli.md), a secondary server (operations.md),
tokens vs TSIG keys (permissions.md); CHANGELOG.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- New zone dialog: choose Domain or Reverse zone. Reverse zones are
created from a network and their name is generated; both kinds show the
exact zone name and flag likely mistakes (addresses or URLs as names,
host-like names, duplicates in the view, parent/child zones, networks
off the octet/nibble boundaries) before anything is submitted.
- Record form: clears every field but the type after an add; shows the
record exactly as it will be stored and warns about unqualified names.
In reverse zones it takes an address, defaults to PTR, suggests host
names of A/AAAA records with that address and warns about a second PTR;
the record list shows addresses.
- Address match lists (options, view match lists, ACL elements) offer the
existing ACLs, TSIG keys and built-ins as one-click suggestions and
flag unknown names.
- Server: in reverse zones a record can be named by its address, and a
PTR target like nas.example.com without the final dot is read as the
full host name (a bare label is refused). Warnings noticed while parsing
record data reach the result again.
- Fixes: brand link hover underline, the dashboard's "New zone" link
opening the dialog twice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Off by default (stats in jarl.yaml). When enabled, Jarl adds a loopback
statistics channel and a response log to named's configuration (merged
into existing logging/statistics-channels statements) and switches
response logging with rndc responselog, because the responselog option
only counts when named starts. jarld polls named's counters every minute
and tails the response log (resuming after restarts and across
rotation). It stores aggregates, never individual queries, in a separate
SQLite database: per-minute, hourly and daily counters (queries, result
codes, record types, views, zones, cache hits, upstream latency, DNSSEC)
and hourly/daily top lists (names, clients, NXDOMAIN and SERVFAIL names,
refused clients), each with its own retention. Clients can be anonymized
or excluded.
- Web UI: Statistics page with KPI tiles, queries and failed answers over
time, a weekday x hour heatmap, top lists and breakdowns; SVG charts
with hover/keyboard readouts, a table view and light/dark palettes
validated for colour-vision deficiency.
- CLI: jarl stats status|summary|top|timeline|heatmap|breakdown.
- API: /api/v1/stats/*, behind a new "stats" permission resource.
- jarld brings named's configuration up to date with jarl.yaml at
startup (engine.SyncConfig), never overwriting hand-edited files.
- resync now refuses to overwrite drifted files without force, as
documented.
- tmpfiles.d creates /var/log/named (allowed by named's AppArmor profile
on Debian 13 and Ubuntu).
- The e2e harness runs named with -f like the Debian unit.
- docs/stats.md, plus API, CLI, configuration, permissions and README
updates.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Jarl keeps a BIND 9.20 server's whole configuration (views, ACLs, TSIG
keys, zones of every type, records, named.conf options) in SQLite and
renders named.conf, keys.conf and zone files from it.
Every change goes through one changeset pipeline: whole-configuration
validation, named-checkconf -z and named-checkzone in a staging
directory, atomic install, rndc reconfig/reload, serial verification
with rndc zonestatus, and rollback if named does not load the change.
Changes apply one at a time by default or are bundled and applied
together. Applied changesets can be reverted.
- jarld: the daemon with the REST API and an embedded web UI, plus import,
adopt, check, resync, backup and local user recovery commands
- jarl: the CLI, including ACME DNS-01 hooks for certbot and acme.sh
- users with argon2id passwords and CSRF-protected sessions; hashed API
tokens with granular grants and roles; an audit log
- systemd unit, sysusers.d/tmpfiles.d files, Makefile
- unit tests, integration tests against a real named, scripts/e2e.sh
- docs/ guides, README and CHANGELOG
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
adamandClaude Opus 5.5
abrown38andClaude Opus 5.5