# Blocking

Jarl can make named answer "this name doesn't exist" (NXDOMAIN) for ads,
trackers and malware, like Pi-hole does, for every device that uses your
server to resolve names. It has two parts:

- **Blocklists**: lists of domains published by others, which jarld
  downloads and keeps up to date.
- **Your rules**: domains you block or allow yourself. They take precedence
  over every list.

It uses BIND's own mechanism for this, response policy zones (RPZ), so named
does the blocking itself; jarld only prepares the lists.

- [Quick start](#quick-start)
- [Where blocking applies](#where-blocking-applies)
- [Your rules](#your-rules)
- [Blocklists](#blocklists)
- [Checking a name](#checking-a-name)
- [Pausing](#pausing)
- [Statistics](#statistics)
- [Memory and performance](#memory-and-performance)
- [How it works](#how-it-works)
- [Troubleshooting](#troubleshooting)

## Quick start

In the web UI, open **Blocking**, pick one of the well-known lists, and
click **Add list**. Or with the CLI:

```sh
jarl blocklist add hagezi-multi https://raw.githubusercontent.com/hagezi/dns-blocklists/main/adblock/multi.txt
jarl blocklist list                     # "ok" once downloaded, usually within seconds
jarl block check ads.doubleclick.net    # blocked? by what?
jarl block allow cdn.example.com        # something you need was blocked
```

Like every change in Jarl, adding a list or rule can be staged and reviewed
first (the web UI does this by default: apply it under **Changes**).

## Where blocking applies

Blocking changes the answers named gives when it resolves names for a
client (recursion). It doesn't change what the internet sees of your own
zones: other resolvers ask your server without recursion.

**Views.** A list or rule applies to the views you choose, or by default
to every view that offers recursion. With the usual split (an `internal`
view that resolves for your network, an `external` view that only answers
for your zones) that is just `internal`. A view that doesn't offer
recursion gets nothing, and naming one gives a warning. Without views,
blocking applies to the whole server.

**What it can't do:**

- Devices that don't use your server for DNS aren't affected. That includes
  browsers using their own DNS over HTTPS, and devices with a hard-coded
  resolver (8.8.8.8). A firewall rule that sends port 53 to your server, and
  your network's DNS settings, are the usual answers.
- A device that validates DNSSEC itself sees a blocked name as a
  validation failure rather than "doesn't exist". It's still blocked.
- A list can contain names in your own zones. They are blocked like any
  other; allow them with a rule if that's not what you want.

## Your rules

A rule **blocks** or **allows** a domain and every name below it, or with
`--exact` (web UI: "only this exact name") just the domain itself.

```sh
jarl block add doubleclick.net                       # doubleclick.net and everything below it
jarl block add telemetry.example.com --exact         # just that name
jarl block allow cdn.example.com --view internal     # an exception, in one view
jarl block list
jarl block delete doubleclick.net                    # or: --id ID
```

**Precedence:** your rules come before every blocklist, and among your
rules the most specific one wins. With these rules:

| Rule | |
|------|-|
| block `example.com` | and below |
| allow `cdn.example.com` | exact |

`example.com` and `www.example.com` are blocked, `cdn.example.com` is
allowed, and `img.cdn.example.com` is blocked again (the allow rule was for
the exact name). An allow rule beats a blocklist entry whatever the lists
say.

There is one rule per domain and view; a second one is refused. A rule
takes effect as soon as the change is applied.

## Blocklists

**Formats.** Lists are read line by line; one list may mix formats:

| Line | Blocks |
|------|--------|
| `\|\|ads.example^` (Adblock) | the name and every name below it |
| `*.ads.example` | the name and every name below it |
| `0.0.0.0 ads.example` (hosts file, any address) | just the name |
| `ads.example` (plain domain) | just the name |

Comments (`#`, `!`), headers and blank lines are ignored. Lines that DNS
can't act on are skipped and counted: Adblock exceptions (`@@`), cosmetic
and URL rules, addresses, invalid names, and single labels (a broken list
can't block `com`). Prefer lists in Adblock format: they say which entries
cover the names below them.

**Well-known lists** (sizes in October 2026; they change):

| List | URL | Domains | Memory per view |
|------|-----|--------:|----------------:|
| Hagezi Light | `https://raw.githubusercontent.com/hagezi/dns-blocklists/main/adblock/light.txt` | 55,000 | ~65 MB |
| Hagezi Multi Normal | `https://raw.githubusercontent.com/hagezi/dns-blocklists/main/adblock/multi.txt` | 159,000 | ~190 MB |
| Hagezi Pro | `https://raw.githubusercontent.com/hagezi/dns-blocklists/main/adblock/pro.txt` | 195,000 | ~235 MB |
| OISD Small | `https://small.oisd.nl/` | 58,000 | ~70 MB |
| OISD Big | `https://big.oisd.nl/` | 241,000 | ~290 MB |
| StevenBlack hosts | `https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts` | 73,000 | ~45 MB |

One good list is usually enough; lists overlap a lot. Hagezi Multi Normal
is a balanced start; Light and OISD Small block less but almost never
something you need.

**Updates.** jarld checks each list every `blocking.refresh` (a day by
default) and downloads it only when the server says it changed. A new
version is checked with `named-checkzone` and replaces the old one only
when its content differs; named then reloads it. If a download or check
fails, named keeps using the previous version, jarld tries again within
the hour, and the dashboard shows the error. To update now:

```sh
jarl blocklist refresh              # every list; or: refresh hagezi-multi [--force]
```

**Managing lists:**

```sh
jarl blocklist update hagezi-multi --view internal     # --view auto: every view with recursion
jarl blocklist update hagezi-multi --url URL --name NEW-NAME
jarl blocklist disable hagezi-multi                    # stop using it, keep it (enable: back without a download)
jarl blocklist delete hagezi-multi
```

A list's state is **ok** (in use), **waiting** (not downloaded yet),
**error** (the last update failed; the previous version stays in use),
**disabled**, or **idle** (it applies to no view, so it does nothing).

## Different blocking for different devices

Client groups give some devices less or more blocking than the rest, like
Pi-hole's groups: no blocking for a work laptop, an extra list for the
kids' tablets.

**Steps** decide which lists a device gets. Each step includes the lists
of the steps below it, plus its own:

| Step | Gets |
|------|------|
| `off` (built in) | only your rules |
| `normal` (built in) | your rules and the normal lists; every device not in a group |
| `strict` (one you add) | normal, plus the lists at step `strict` |
| `very-strict` (one you add) | strict, plus the lists at step `very-strict` |

Every list starts at a step (normal unless you choose one), and every
group is at a step. Your rules apply at every step, `off` included.

```sh
jarl block step add strict
jarl blocklist update social-media --step strict
jarl block group add work 10.10.0.20 --step off
jarl block group add kids 10.10.0.50 10.10.0.51 2001:db8:1::/64 --step strict
jarl block group list
```

In the web UI, the Blocking page's **Devices** panel holds the steps and
the groups, and each list has a step.

- **Members** are addresses, networks (`10.10.0.0/24`), ranges
  (`10.10.0.20-10.10.0.49`), or ACLs made only of those (`key`, `localnets` and `!` can't be used: blocking matches
  clients by address). A device is in one group: two groups with the same
  address are refused, but a more specific address in another group wins
  (`10.10.0.0/24` in one group, `10.10.0.20` in another).
- **Steps only add.** A group gets everything up to its step, so "kids get
  list A, guests get list B, and neither gets the other's" can't be done
  with steps. That needs a view per group, each with its own lists (and
  their memory).
- Lists aren't copied per step: each is loaded once, and the steps cost a
  small zone each. Lists at a step no group reaches block nothing (Jarl
  warns, and shows them as "no effect").
- named must see the device's own address. When a router hands out itself
  as DNS server and forwards to named, every query comes from the router,
  and groups can't tell devices apart. Devices also need fixed addresses
  (DHCP reservations); IPv6 privacy addresses change, so add a device's
  network, or rely on its IPv4 address.
- `jarl block check NAME` (and the Blocking page) answers for normal
  devices, and says when a list of a higher step blocks the name.

## Checking a name

`jarl block check NAME`, or the box at the top of the Blocking page, says
for each view whether a name is blocked or allowed, and by which rule or
list entry:

```
$ jarl block check img.ads.example.com
view internal:  blocked by blocklist hagezi-multi (entry *.ads.example.com)
view guest:     allowed by your rule 12 (entry *.ads.example.com)
```

Views without blocking aren't listed.

In the web UI a blocked name gets an **Allow** button, and the statistics'
most blocked names link to this check.

## Pausing

To see whether blocking is what breaks a site, pause it: every name is
answered normally until the time is up (at most a day), then blocking
resumes by itself, also if jarld was restarted in between. A pause can
also last until someone resumes blocking (like Pi-hole's "indefinitely").

```sh
jarl block pause          # 10 minutes; or: jarl block pause 1h
jarl block pause indefinitely
jarl block resume         # end it now
```

In the web UI, **Pause blocking** is at the top of the Blocking page (with
**Until I resume** among the lengths), and the dashboard says while
blocking is paused. The lists stay loaded (the
rules zone just lets everything through), so pausing and resuming take
effect within a second. Pausing and resuming are recorded in the history
like other changes.

## Statistics

With [query statistics](stats.md) on (including `query_log`), Jarl counts
what blocking does: blocked queries over time (next to all queries) and
as a share of them, which rules and lists blocked them, the most blocked
names, and the clients with the most blocked queries (`jarl stats summary`,
`jarl stats top blocked`, `jarl stats top blocked-clients`, `jarl stats
breakdown blocklist`). Blocked answers are left out of the NXDOMAIN figures, which
are about names that really don't exist.

The Blocking page shows the last 24 hours too: a **Blocked (24h)** column
for each list, and one count for your rules together (named logs which
policy zone matched, not which rule in it).

Without statistics named doesn't log what it blocks at all.

## Memory and performance

**Memory** is the cost to watch. named keeps each list in memory, once per
view it applies to: about 0.6 KB per policy record (an Adblock entry is
two records: the name, and the names below it). The Blocking page and
`jarl blocklist list` show the estimate per list. Hagezi Pro in one view
took named from 25 MB to 260 MB in a test with BIND 9.20; while a list
reloads, the old and new versions briefly coexist.

**Answers aren't slowed**: named looks blocked names up in memory, and
answers them without asking the internet.

**Updating a list** (Hagezi Pro: download, parse, check) takes jarld about
2 seconds. While named loads the new version, the queries that the loading
thread would have answered wait, up to half a second; this only happens
when the list changed, at most once per `blocking.refresh`.

**Other changes are unaffected**: the lists' contents never go through
Jarl's apply, so adding a record takes as long with a list as without.

Downloads are limited by `blocking.max_download_mb` and
`blocking.max_entries` ([configuration.md](configuration.md#blocking)).

## How it works

For each view (or the server, without views) Jarl writes a
`response-policy` statement and the policy zones it lists, in this order:

```
response-policy {
	zone "rules.jarl.invalid" min-update-interval 0;              # your rules
	zone "hagezi-multi.blocklist.jarl.invalid" min-update-interval 0;
} qname-wait-recurse no break-dnssec yes;
```

- Policy zones are named under `.invalid`, so they can't clash with real
  zones (zone names under `jarl.invalid` are refused). They allow no
  queries or transfers.
- The rules zone of each view is a file next to your zone files
  (`/var/lib/bind/jarl/VIEW/rules.jarl.invalid.rpz`) and shows up in the
  changeset diff like any other.
- A list's file is `/var/cache/bind/jarl/blocklists/list-ID.rpz`, shared by
  the views that use it. Until the first download it is an empty policy
  zone, so named always starts. Files of deleted lists are removed.
- `qname-wait-recurse no` blocks without first resolving the real answer;
  `break-dnssec yes` also blocks for clients that ask for DNSSEC data;
  `min-update-interval 0` applies a new version at once.
- named looks names up in a policy zone like in any zone, so a wildcard
  doesn't apply below a name the zone also contains. Jarl writes the zones
  so that the most specific rule still wins.
- A `response-policy` option of your own can't be combined with Jarl's
  blocking in the same view: Jarl refuses the change and says so.
- Rewrites are logged to Jarl's response log when statistics read it, and
  not at all otherwise.
- With client groups, a **gate** zone stands in front of the lists of each
  step: `off.gate.jarl.invalid` before the normal lists,
  `STEP.gate.jarl.invalid` before a step's. named checks the zones in
  order and the first match decides; a gate matches the devices below its
  step by address (`rpz-client-ip` triggers) with `rpz-passthru`, so they
  never reach the lists behind it. A gate is never logged, and its file is
  next to the rules zone (`/var/lib/bind/jarl/VIEW/strict.gate.jarl.invalid.rpz`).
  For "everyone except these devices", a gate lists the address ranges
  around them, at most a few hundred entries. named matches IPv4 clients as
  IPv4-mapped IPv6 addresses, so the IPv6 part leaves `::ffff:0:0/96` out.

Lists and rules need the `blocking` permission ([permissions.md](permissions.md)).

## Troubleshooting

- **"no domains found in N lines"**: the URL didn't return a list (often an
  HTML error page). Check it in a browser.
- **A list has no effect / is "idle"**: no view it applies to offers
  recursion. Pick the view your devices use (`--view internal`).
- **Something is still answered**: `jarl block check NAME` shows whether
  Jarl blocks it. If it does, the device probably doesn't use your server
  (DNS over HTTPS, another resolver), or has the answer cached for a
  while.
- **Something you need is blocked**: `jarl block check NAME` shows which
  list; `jarl block allow NAME` overrides it.