housecarl/README.md

<p align="center"><img src="artwork/banner.svg" width="340" alt="Housecarl: a carved Nordic doorway, above the HOUSECARL wordmark"></p>

# Housecarl

*Every Jarl has a housecarl at his side; this one keeps the door.*

Housecarl is a firewall for Linux that you manage through a web UI, a
REST API and a command line client (`hc`), all three backed by the same
API. It is the third of a set with [Jarl](https://gitea.adbraun.lol/adam/jarl),
the BIND manager, and [Steward](https://gitea.adbraun.lol/adam/steward), the
DHCP server, and works the same way: every change is checked as a whole
before it is used, is recorded in a history where it can be undone, and is
audited.

In Skyrim, a housecarl is the Jarl's sworn bodyguard: it stands at the
door and decides who comes in. Housecarl does that for your network. It
keeps the machine's nftables ruleset, built from its own database, in one
table of its own.

## What it does

* **Zones, sets and services, then rules.** Name your interfaces (`wan`,
  `lan`, `wg`), your addresses (`trusted`, IPv4 and IPv6 in one set) and
  your ports (`web`, or the built-in `ssh`, `dns`, `https`…), and
  write ordered rules with them: in, out or through the firewall, by
  zone, address, service, connection state, time of day, rate per
  source, or connection count. Anything else can be written as an
  nftables rule by hand.
* **Bandwidth and quotas.** Byte-rate limits per device, and traffic
  allowances that reset daily, weekly or monthly (or by hand), counted
  across changes and reboots.
* **IPv4 and IPv6 together.** One rule covers both; Housecarl writes the
  nftables rules each family needs.
* **NAT in one object.** A port forward is the DNAT, the forward accept
  and the hairpin NAT together, and can open the same port to an IPv6
  host. Masquerading, SNAT and redirects too.
* **The rules every firewall needs**, built in and each one switchable:
  loopback, established connections, invalid packets, the ICMPv6 that
  IPv6 needs, antispoofing for your prefixes, MSS clamping for PPPoE, the
  DHCPv6 client, and a flowtable fast path
  ([docs/flowtable.md](docs/flowtable.md)).
* **Changes you can trust.** Each change is validated as a whole, checked
  by nftables itself, and applied in one transaction. As in Jarl, edits
  can be collected in a changeset, reviewed with the diff of the ruleset,
  and applied (or discarded) together. A change made over
  the network is on probation: unless you confirm it within two minutes,
  it rolls itself back, so a rule that cuts you off undoes itself.
* **Your existing ruleset, imported.** `hc import` turns an nftables
  ruleset into zones, sets, services, rules and port forwards, keeping the
  rules' order, and keeps what it can't translate as raw rules
  ([docs/import.md](docs/import.md)).
* **Try it first, in shadow mode.** Housecarl's ruleset runs beside the
  firewall you have, blocking nothing: its hits, log and tracer show what
  it would drop, so you see what switching over would break before you do
  ([docs/shadow.md](docs/shadow.md)).
* **Ban lists for Guard and fail2ban.** A program on any machine bans an
  address it caught misbehaving in its logs, and the ban list says what
  that address is kept from: the firewall, some hosts, or everything
  ([docs/bans.md](docs/bans.md)).
* **Easy to watch.** A zone matrix of what is allowed between zones,
  statistics over time (traffic per zone and device, drops, the sources
  blocked most, connections; [docs/stats.md](docs/stats.md)), hits per rule, a live log of what was dropped and
  why, the connections the firewall tracks (and closing them), a packet
  tracer that names the rule that dropped something, in any table, and
  the history of every change, field by field, with undo.
* **Its own table only.** Docker, Incus and libvirt keep theirs. The
  confirmed ruleset is loaded at boot, before the network comes up, even
  if housecarld doesn't start; should it fail to load, a fallback keeps
  anything new from the internet out until housecarld puts it back.
* **Sets other programs can fill.** A dynamic set's entries expire by
  themselves, and a token can be limited to one set: that is how
  Steward's captive portal will let a guest in.
* **Users, tokens and HTTPS** as in Jarl and Steward, with the web UI's
  certificate from Let's Encrypt through Jarl
  ([docs/certificates.md](docs/certificates.md)).

Not yet: rules by MAC address or DNS name, and iptables import
([docs/design.md](docs/design.md)).

## Quick start

On Debian 13, from the package registry (see
[docs/install.md](docs/install.md) for other ways):

```sh
sudo apt install housecarl
sudo -u housecarl housecarld init          # asks for the admin password
sudo systemctl enable --now housecarl      # applies nothing until configured

# Import the ruleset you have...
sudo hc import --defines /etc/nftables.conf -n      # look first
sudo hc import --defines /etc/nftables.conf
sudo hc takeover "inet main"
sudo systemctl disable nftables.service

# ...or start from scratch: let yourself in first
sudo hc set add admins 192.168.1.0/24
sudo hc rule add input --from admins --service ssh
sudo hc zone add wan --interface ppp0 --external
sudo hc zone add lan --interface eth1
sudo hc rule add forward --in lan --out wan
sudo hc snat add --out wan
sudo hc status
```

The web UI is on `http://127.0.0.1:8070/` (see `listen` in
`/etc/housecarl/housecarl.yaml`); write a rule that lets you reach it.

## Documentation

* [install.md](docs/install.md): packages, building from source, first steps
* [rules.md](docs/rules.md): zones, address sets, services, rules and the built-ins
* [nat.md](docs/nat.md): port forwards, hairpin NAT, IPv6 pinholes, source NAT, redirects
* [bans.md](docs/bans.md): ban lists, where Guard and fail2ban ban addresses
* [import.md](docs/import.md): moving from an existing nftables ruleset
* [shadow.md](docs/shadow.md): shadow mode, Housecarl beside your firewall, changing nothing
* [operations.md](docs/operations.md): probation, the boot and its fallback, hits and the log, monitoring, backups, troubleshooting
* [flowtable.md](docs/flowtable.md): the fast path for forwarded traffic, and when (not) to use it
* [certificates.md](docs/certificates.md): HTTPS with a certificate from Let's Encrypt, through Jarl
* [jarl.md](docs/jarl.md): connecting Housecarl to Jarl, and what its token may do
* [cli.md](docs/cli.md): the `hc` command line client
* [api.md](docs/api.md): the REST API
* [configuration.md](docs/configuration.md): `/etc/housecarl/housecarl.yaml`
* [permissions.md](docs/permissions.md): users, roles, grants and API tokens
* [validation.md](docs/validation.md): every check and what it means
* [design.md](docs/design.md): how Housecarl is built, and what 0.1 leaves out
* [development.md](docs/development.md): building, testing, releasing

## Status

Housecarl 0.2.0 is in testing (0.2.0-rc.3+git62-0d16358): zones, address sets and
services with ordered rules, IPv4 and IPv6, port forwards with hairpin NAT
and IPv6 pinholes, source NAT and redirects, built-ins, probation for
network changes (confirmed by the client that made them), the ruleset
at boot with a fail-closed fallback, hits and the drop log, nftables
import, changesets reviewed with the ruleset's diff (as in Jarl),
bandwidth limits and quotas, shadow mode beside another firewall, ban
lists for Guard and fail2ban, a web UI, REST API and CLI.

## Licence

MIT, see [LICENSE](LICENSE).