- jarl cert get --combined PATH writes the key and full chain in one file
(mode 600, atomic), kept outside --dir so it can live in HAProxy's crt
directory; JARL_CERT_COMBINED for the hook. Turning it on, moving it or
removing it ('') applies from the files on disk and runs the hook.
- jarl cert get --local writes the combined file and runs the hook from
this host's files, without asking jarld.
- jarl cert saved NAME shows all of one certificate's settings.
- jarl cert list: USES "get" for certificates for other hosts, and a
PULLED column (last download, "(old)" while a host is behind). Owners
now see their own downloads (pulled_by), not only administrators.
- jarl cert get without a name refuses per-certificate flags.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
For Guard's jarl preset and fail2ban: msg="login failed" ip=... user=...
and msg="token refused" ip=..., beside the audit records.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Documentation: lego 5's commands beside lego 4's, and lego on a host
inside a split DNS (its propagation check and the ways round it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
docs/acme.md and jarl-lego show lego 5's commands (lego run, which also
renews; lego migrate when upgrading) beside lego 4's. A new section
explains why lego on a host inside a split DNS fails its own propagation
check when the challenge goes into the external view only (JARL_VIEW, a
one-view token, httpreq's /view/...), and the ways round it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A certificates role (template) for tokens and users that get
certificates for other hosts with jarl cert get.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A template for tokens and users that get certificates for other hosts
(jarl cert get): certificates:write, to narrow with names= in the web
UI's "Insert a template…", or --role certificates in the CLI. The token
form's template filter no longer counts "*" as covering certificates,
as the server doesn't.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Certificates for other hosts (jarl cert get, with a daily timer),
certificate export, PTR record and override fixes in linked zones,
one-view tokens with linked zones, numeric order in reverse zones, and
cert get refusing to take over a name saved for another Jarl server.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each Jarl server has its own certificate names, but a host keeps one
saved NAME.json (and, by default, one /etc/jarl/certs/NAME). Asking a
second server for the same name overwrote the first one's settings and
files, so the first certificate quietly stopped being renewed. Now that
is refused, as is a --dir holding another certificate's files;
--replace takes the name or directory over. A --dir another saved
certificate uses is always refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
0.6.1's fourth release candidate: the Stats page's range buttons follow
the retention settings, jarl changeset show prints local time, and the CLI
no longer prints "and N more" when the server sends no PTR list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Statistics page offers only the ranges kept (longest of the minute,
hour and day retentions), adds 1y and 2y when the daily data covers them,
caps the heatmap at the hourly retention and links to Explore within
retention.queries. Status and explore send retention_seconds. The query
log error names stats.retention.queries.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A 0.6.1-rc.2 server sends ptr_other_views without ptr_other_views_list,
so zone show printed only "and 1 more" under "Other views:".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
0.6.1's third release candidate: reverse zones list the addresses only
other views' records use, with clearer wording, and jarl zone show lists
missing PTR records.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The zone page and jarl zone show list the addresses only other views'
records use (ptr_other_views_list), with the name each would get and the
view it comes from, and say plainly that they aren't missing here. The
page's button reads 'Add PTR records for them in view X'. zone show
lists the missing PTRs too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
0.6.1's second release candidate: reverse zones sort numeric labels by
value (2 before 101), and a reverse zone no longer reports addresses
only other views' records use as missing PTR records; filling names
them from the other view only with --other-views.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A reverse zone's missing PTR count covers only its own view's A and
AAAA records. Addresses only other views' records use are counted apart
(ptr_other_views, 'Other views' in zone show, a note on the zone page)
and filled only when asked: fill-ptr --other-views, zone create
--fill --other-views, or the New reverse zone dialog's checkbox. This
keeps one view's host names out of another view's reverse zones.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Records, zones and findings now order all-digit labels numerically, so
reverse zones list 2 before 101. model.CanonicalLess is replaced by
model.NameLess; other labels keep byte order.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
0.6.1's first release candidate: certificates for other hosts (jarl cert
get, cert schedule, the certificates grant), certificate export, the
missing PTR list, links to a zone in other views, one-view tokens with
linked zones, PTR records and overrides in linked zones per view, the
registrar and DS guidance for subdomain and reverse zones, the stats
heatmap and cname_chain fixes. Upgrading a 0.6.0 database was tested.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The "Busiest times" grid's hours without data used the class "empty",
which picked up the padding of empty messages. One CNAME to another no
longer warns; three or more get an info note showing the chain.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
jarld obtains and renews a certificate for another host; the host asks
for it with one command, waits, downloads it when it is newer than its
copy and runs a hook with the paths in JARL_CERT_* variables.
- Certificates have an owner user; another user can't take the name.
An existing one is obtained again only when a name is added or
removed. A new certificates grant (names=) says which names a user
may have; it is never part of "*". Users may own
certificates.max_per_user certificates (10) or their own cert_limit.
- POST /certificates/{name}/request; owners may list, show, export and
delete theirs; keys only over HTTPS, the socket or loopback; every
download is recorded and shown as "Pulled by".
- CLI: jarl cert get (saved settings, all saved when no name), cert
saved, cert forget, cert schedule (daily systemd timer, Linux, root).
- Migration 14. Tests: server, auth, and e2e against Pebble.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Certificates can be exported for use outside Jarl: Export… on the
Certificates page (download or copy), jarl cert export, and
GET /certificates/{name}/pem?part=fullchain|cert|key|bundle.
Administrators only; key exports are audited.
- A reverse zone's missing-PTR banner lists the addresses and names
(ptr_missing_list in the zone API).
- "Used for" shows DoT/DoH for named, and "not used by Jarl" instead of
"nothing yet".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A token for one view of a linked zone (an ACME token for external)
couldn't add records: a new record was shared and reached the other
view. A new name and type is now local when the user may not change it
in the other views. A zone name in several views resolves to the only
one the user can see, and the error no longer names views they can't.
GET /views lists the views a user sees zones in (name, colour, count;
limited) without views:read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The header says "also in VIEW" for every zone of the same name in
another view, linked or not, in the view's colour, keeping the open tab
where the other zone has it. The zone API gains in_views.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The DNSSEC tab said "give this to your registrar" for every zone whose
parent wasn't in Jarl in the same view. The DNSSEC response now has
ds_at/ds_place/ds_note: the parent zone in Jarl (any view, its own
first, then a public one), the registrar for a registered domain, the
parent zone wherever it is hosted for a subdomain, the ISP or RIR for a
reverse zone, and nowhere for a private name. The page and the CLI use
them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With porkbun.domains empty the Registrar tab was offered for every zone
and always failed for subdomain zones, reverse zones and private names.
dnsname.RegisteredDomain (public suffix list) now decides; the others
get a message naming what delegates them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Auto-PTR (and --ptr) changed PTR records in every linked view, whatever
view the address record was in. ptrSync now compares each touched A/AAAA
set before and after, per view, and changes only that view's reverse
zone. PTR records in linked reverse zones are local (fill too); a shared
PTR set is made local in each view before one view changes it.
Deleting a linked zone's local records no longer brings the shared ones
back into the view: the name and type are gone from that view and the
other views keep theirs, local to each. Share still restores.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A zone update that changes nothing stages nothing: saving a zone's
settings unchanged says "Nothing changed" instead of staging an empty
change. Staging operations that change nothing is a 400 "nothing to
change".
- The settings form showed the SOA MNAME without its final dot, which the
server reads as relative to the zone, so saving wg.adbraun.lol turned
ns1.adbraun.lol. into ns1.adbraun.lol.wg.adbraun.lol. Names outside the
zone keep the dot, and MNAME is only sent when edited.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A token never does more than its user, so offering wider templates only
misled. On the Users page the templates follow the token's user, not the
administrator making it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The tab picked the first other view in view order, so a zone linked with
one view opened compared with an unrelated one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
systemctl restart/status jarld now work too. The package relinks a unit
enabled by an older version on upgrade, so the alias appears without
re-enabling; make uninstall removes the link.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ground rules, building and testing with real BIND, where things live,
web UI rules, BIND gotchas, and the git and release workflow.
docs/development.md lists the packages its layout was missing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reverse zones made easy, comparing views rebuilt, exploring the statistics through a query log (filters, several values, exclusions), storage on the dashboard, encrypted DNS with several host names and views per listen address, option set matching named statements, forwarding over TLS documented. Upgrade from 0.5.2 tested in Debian 13.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Since rc.2: the Encrypted DNS page and docs test with BIND's dig +tls / +https instead of kdig and curl's JSON API.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The client hints and docs tested DoT with kdig (Knot's, often not installed) and DoH with curl's application/dns-json, which named's DoH doesn't speak (RFC 8484 wire format only). They use dig +tls / dig +https with +tls-ca and +tls-hostname now, with the port when it isn't the default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Since rc.1: the explore page has a filter bar, several values per filter, !value to leave one out and *.domain, a hide link on list entries, and refreshes with its own filters (the Statistics page's refresh drew over it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Statistics page's once-a-minute refresh also ran on #/stats/explore and drew the Statistics page over it, losing the filters. It now runs on the Statistics page only, and the explore page refreshes itself every minute with the same filters (not while the filter bar is being edited).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each explore filter takes several values, comma separated (any of them), !value to leave one out, and *.example.com for a name and the names below it. Every value is a chip with its own ✕; clicking a value in the lists adds it, and hide leaves it out. The filter bar's fields take lists. domain= still works.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The explore page has a filter bar to type filters in (client, name or it and below, view, type, result, blocked), starting from the current filters and suggesting values from what is shown, so taking every filter out no longer means going back. The Statistics page opens it with Explore the answers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
0.6.0's first release candidate: reverse zones made easy, comparing views rebuilt, exploring the statistics through a query log, storage on the dashboard, encrypted DNS with several host names and views per listen address, option set matching named statements, forwarding over TLS documented. The upgrade from 0.5.2 packages was tested in a Debian 13 container.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
jarl option set tls NAME (and key, remote-servers, primaries, http, dnssec-policy, key-store, server, acl, view, zone, parental-agents) matches the name after the keyword too: setting tls cloudflare no longer replaces tls quad9. jarl option unset tls NAME removes one by its name. docs/encrypted-dns.md has forwarding to Quad9 or Cloudflare over TLS: one changeset, the options explained, several providers, checking it works, and why not over HTTPS.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
"The query log holds 7 answers (stats.retention.queries)" read like 7 days' worth. The dashboard and the Statistics page now say how many answers it holds and how long each is kept; the dashboard's storage info has query_log_retention.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The server section shows the statistics database's size (with its -wal and -shm) and how many answers the query log holds, linking to the dashboard's Storage panel; the disk tiles get the same bar as the dashboard. GET /stats/server has database {path, bytes, query_log_rows}.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
jarld keeps every answer for a while (stats.retention.queries, default 7 days) in the statistics database: time, client, view, name, type, result and what blocked it. Every client, name, view, record type, result and blocklist on the Statistics page leads to an explore page for it: answers over time, the top values of every other dimension (each a link that narrows further) and the latest answers. GET /stats/explore.
The dashboard shows the size of Jarl's databases (and the query log's rows) and, per disk Jarl uses, how full it is and the databases' share.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The setup takes several host names (one certificate for all; the health check says when the served certificate misses one), stored in the settings. Each listen address gets its own views for the host names' A/AAAA records (--address ADDR=VIEW,..., a view checkbox per address in the form), always local to the view, with a warning when a public view would get a private address; a view no longer given loses the address, other records of the names stay, and the form starts from where the records are now. Certificates (page and jarl cert show) say what named uses each for: DNS over TLS or HTTPS, on which addresses and ports.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A reverse zone's fill (and fill-ptr, the missing-PTR counts) names an address no record of its own view uses from another view's record, so an internal reverse zone can give the PTR of a host only external has an AAAA for; New reverse zone with a view chosen lists those addresses, marked. Automatic suggestions stay per view.
For hundreds of addresses: the New reverse zone list has a search; on the Zones page the public addresses fold away, have a search, show 25 at a time and Dismiss these N dismisses everything a search found in one change (reverse.dismiss takes prefixes; --dismiss takes several).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Zones page's New reverse zone lists every network the records use without a reverse zone, in every view, also where nothing is suggested (suggestions off, dismissed, public views), marked. Picking one fills in the network and view; size buttons (/48 /56 /64 /128, /16 /24 /32) re-mask it around a record's address, so a /48 becomes the records' own /64. Fill stays on. jarl zone suggest-reverse --all [--view V]; GET /reverse-zones/suggestions?all=1&view=.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Compare views tab and jarl zone diff compare a zone with the same zone in other views from the view you're on: a summary per view, what is answered differently (Use this everywhere), the names only some views have (Add to VIEW), and how many are the same. One name can be compared (jarl zone diff ZONE NAME [TYPE], a Compare button per record). The CLI prints one line per record, cut to the terminal (--wide shows it whole); the web UI cuts long values with the whole one on hover. GET /zones/{zone}/compare returns these sections, with ?with, ?name and ?type.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The page's Content Security Policy (style-src 'self') blocked the inline style attribute, so long statements didn't wrap and the browser console reported the violation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
adamandClaude Opus 5.5